Difference between revisions of "Material"
From silent_runner
(Created page with "Cross fins printed parts: Cross fin elevator Cross fin yaw Elevator clips (5x) Elevator servo horn Depron 3 mm CFK rods: 2 mm diameter 1 mm diameter Spring st...") |
|||
| Line 1: | Line 1: | ||
| − | + | '''Printed parts:''' | |
Cross fin elevator | Cross fin elevator | ||
| Line 9: | Line 9: | ||
Elevator servo horn | Elevator servo horn | ||
| − | Depron | + | Motor ring |
| + | |||
| + | Bow vertical | ||
| + | |||
| + | Bow horizontal | ||
| + | |||
| + | Rod connector | ||
| + | |||
| + | '''Depron Parts:''' | ||
| − | CFK rods: | + | '''CFK rods:''' |
2 mm diameter | 2 mm diameter | ||
1 mm diameter | 1 mm diameter | ||
| + | '''Other''' | ||
Spring steel wire 1 mm | Spring steel wire 1 mm | ||
| − | + | Screws and nuts M2 (5x) | |
| − | + | Envelope | |
| − | |||
| − | + | '''Not in the silent_runner kit:''' | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Epoxy Glue | Epoxy Glue | ||
| − | + | Glue for Styrofoam | |
Revision as of 17:07, 26 November 2015
Printed parts:
Cross fin elevator
Cross fin yaw
Elevator clips (5x)
Elevator servo horn
Motor ring
Bow vertical
Bow horizontal
Rod connector
Depron Parts:
CFK rods:
2 mm diameter 1 mm diameter
Other
Spring steel wire 1 mm
Screws and nuts M2 (5x)
Envelope
Not in the silent_runner kit:
Epoxy Glue
Glue for Styrofoam
